Micromod Micro-DCI: 53ML5100 Manual Loader - Manual (Page 39)

53ML5100B Manual Loader
INSTRUCTION MANUAL
35
Table 4-6. System Module
Purpose: This module is used to set the instrument tag name and the display brightness.
Title Symbol
System
Module
Datapoint
Default Attribute
Display
Brightness
Index
BRIGHT B012 4
This parameter controls the display screen
intensity. A value of 0 is the brightest and a
value of 7 is the dimmest intensity. Normal
viewing setting is 4.
Model Number
Low (Display
Only)
A190 Factory Set
It contains the first ten characters of the model
number.
Model Number
High (Display
Only)
A191 Factory Set
It contains the last ten characters of the model
number.
Datalink
Disable
DLD L257 1
This instrument does not have network
capabilities; therefore, the datapoint should be
left at its default value of 1, to indicate no
Datalink capabilities.
Unit Tag Name TAG A008 ML5100
An assignable 10 character name for the system
module (53ML5100).