MaxPower Corp Gamatronic Power+ SA - Manual (Page 70)

Gamatronic Electronic Industries Ltd.
POWER+ SA User Guide (UL), Release 1.0 64
15. INSTALLATION AND SETUP
Read and understand the following procedure
before planning your installation. !
15.1 External Inspection
1. Inspect equipment and shipping containers for any signs of shipping damage or
mishandling. Do not attempt to install the system if damage is apparent. If any
damage is noted, file a damage claim with the shipping agency within 24 hours
and contact your Gamatronic authorized service representative to inform them
of the damage claim and the condition of the equipment.
2. Check for loose connections or unsecured components in the UPS module.
3. Check for any unsafe feature that may present a potential safety hazard.
15.2 Site Preparations
‰ Electrical codes may vary according to location. Observe
all local, state, and federal electrical codes for acceptable
external wiring practices.
‰ If the UPS is not installed according to the instructions in
this manual, it may interfere with radio communications
equipment. The UPS has been tested and found to
comply with the limits for a Class A computing device
pursuant to Part 15 of the FCC rules, which are designed
to provide reasonable protection when operated in a
commercial environment.
‰ Operation of this equipment in a residential area may
cause radio frequency interference, in which case the
user will be required at his own expense to take whatever
measures may be necessary to shield the UPS.
CAUTION!