MaxPower Corp Gamatronic Power+ SA - Manual (Page 64)

Gamatronic Electronic Industries Ltd.
12. MISCELLANEOUS FUNCTIONS
This section describes infrequently used but important features.
Manually entering or leaving bypass mode
When the AC input power is normal, it is handled by the UPS in one of two ways:
• The input AC power is sent to the inverter, where it is regulated and
passed on to the load. This is called normal mode or inverter mode.
• The input AC power bypasses the inverter entirely and goes directly to the
load with no regulation. This is called Bypass Mode.
Usually only a technician will need to manually switch the UPS to Bypass mode.
To manually enter or leave bypass mode:
1. From the Main Screen, press the Ent button to display the Main Menu.
2. On the MAIN MENU, select ADVANCED MENU and press Ent.
3. On the ADVANCED MENU, select TRANSFER LOAD and press Ent.
The TRANSFER LOAD screen tells you if the load is currently on the
INVERTER or if the UPS is in BYPASS MODE.
4. Press Ent to switch the load.
POWER+ SA User Guide (UL), Release 1.0 58