MaxPower Corp Gamatronic Power+ SA - Manual (Page 58)

Gamatronic Electronic Industries Ltd.
9. You can continue to adjust another phase, or press Esc to return to the main
screen.
9.4 Setting the DC voltage
The P OWER + SA must be informed of the DC (battery) voltage. Before setting the
DC voltage, measure and record the positive and negative voltage of the battery with
a multimeter, observing all appropriate safety precautions.
Then, to set the DC voltage:
1. From the Main Screen, press the Ent button to display the Main Menu.
2. On the Main Menu, choose ADVANCED OPTIONS and press Ent.
3. In the ADVANCED MENU, select TECHNICIAN MENU.
4. In the TECHNICIAN MENU select CHANGE VOLTAGE.
5. You are prompted to choose the type of voltage to change.
Select DC VOLTAGE.
6. You are prompted to choose whether you want to set the positive DC voltage or
the negative DC voltage. Select your choice and press Ent.
7. Use the UP and DOWN button to specify the actual value for the positive (or
negative) voltage. Press Ent to apply the change.
POWER+ SA User Guide (UL), Release 1.0 52