Luminex 100E Hardware User Manual - Manual (Page 7)

PN 89-00002-00-013 Rev. D 2 - 1
Safety
Symbols
These symbols describe warnings, cautions, and general information
used in the operation of this Luminex 100E analyzer. These symbols
are further defined under “Safety Precautions.”
Safety Precautions
Read the following safety information before setting up or using the
Luminex 100E analyzer. The user should be present during
operation. The Luminex 100E analyzer contains electrical,
mechanical, and laser components which, if handled improperly, are
potentially harmful. In addition, biological hazards may be present
during system operation. Therefore, we recommend that all Luminex
100E analyzer users become familiar with the specific safety
advisories below, in addition to adhering to standard laboratory
safety practices. The protection provided by the equipment may be
impaired or the warranty voided if the system is used in a manner not
specified by the instructions or Luminex Corporation.
2
Number Symbol Description
1 Protective ground
2 Warning (refer to manual)
3 Warning (refer to manual)
4 Warning (refer to manual)