Luminex 100E Hardware User Manual - Manual (Page 22)

Luminex 100E User Manual
x
MAP Technology
3 - 10 PN 89-00002-00-013 Rev. D
Air Filter
The air filter is located on the front of the Luminex 100E analyzer
behind the front panel. See “Air Filter” on page 4-4 for more
information.
For proper ventilation, do not obstruct the area in front and allow at
least one inch (2.54 cm) of clearance around the Luminex 100E
analyzer.
Figure 9. Air Filter Inside the Front Cover of the
Luminex 100E Analyzer
Fluidics
Regulated Flow
Sheath Supply
Located on the side of the Luminex 100E analyzer are three
connectors that couple directly to the host system’s sheath and waste
fluid subsystems. The nonpressurized sheath fluid connector is blue,
the waste fluid connector is orange, and the pressurized sheath fluid
connector is green.
Note: The host instrument provides the means for waste disposal.