Mechanical – Luminex 100E Hardware User Manual User Manual
Page 10

Luminex 100E User Manual
x
MAP Technology
2 - 4
PN 89-00002-00-013 Rev. D
All Luminex 100E analyzer laser apertures are contained inside a
protective housing within the analyzer. This label appears on the
optics cover within the Luminex 100E analyzer.
Figure 5. Laser Caution Label on Optics Cover
CAUTION
— Use of controls or adjustments or performance of
procedures other than those specified herein may result in hazardous
radiation exposure.
Attention
— L’utilisation des commandes ou réglages ou l’exéction
des procédures autres que celles spécifiées dans les présentes
prescriptions peuvent être cause d’une exposition à un rayonnement
dangereux.
This label appears above the laser apertures located inside the optics
enclosure inside the Luminex 100E analyzer.
Figure 6. Avoid Exposure Label
Mechanical
Warning:
During operation, this analyzer contains moving parts.
Risk of personal injury is present. Observe all warnings and cautions.