Magnum Venus Plastech INNOVATOR MEGAJECT 5000 (8001) - Manual (Page 43)

MAGNUM VENUS PLASTECH Innovator Megaject Manual 43
2. Catalyst Auto Valve Assembly – CAV
Servicing notes:
The catalyst auto valve needs little servicing as all components are suitable for
both MEKP and recommended AAP catalysts
The movement of the spool as indicated from the aluminium air cylinder end
should be between 4 and 5 mm. Any less or greater can cause Catalyst to flow
incorrectly so ensure this movement is observed to be correct by measurement
using callipers after service and before using the machine in production.
Take care not to damage or scratch the spool internal body 6369 when O ring 3316
needs replacing.
The valve should only need servicing if air or catalyst is noted to weep from
between the air cylinder 6078 and Stainless steel body 6067. In this case the O
ring 3316 should be renewed.