Magnum Venus Plastech INNOVATOR MEGAJECT 5000 (8001) - Manual (Page 25)

MAGNUM VENUS PLASTECH Innovator Megaject Manual 25
Figure 4.2 – Side connections
The catalyst over-pressure indicator is also positioned on this connections panel.
It will turn red in the event of an over-pressure condition.
Control box configuration
The user can adjust the flush timer duration, the MPG response time and RGA
stroke timer and alarm volume. The procedures for doing this are described in
the following sub-sections. Use the air circuit for your machine controls to identify
the location of the components that require adjustment.
Many components in the control box are labeled to aid identification and
therefore locating items that may require adjustment should be relatively straight
forward with the aid of a circuit diagram.
The internals of a typical Innovator control box are shown in figures 5.1 & 5.2.
Some components have been marked for illustrative purposes; however it must
be emphasized that the appropriate air circuit should always be used as the
definitive reference.
Turbo Autosprue (TAS)
PPVS or remote “pause” signal
Remote stop signal
Catalyst over-pressure indicator