Liquid Controls HML4-F1 - LCMag - Manual (Page 33)

HML4-F1
33
BATCH FUNCTION
For each formula you can
associate:
‰ Product quantity
‰
Product name
‰ Maximum time for
batch (safety time for
each formula)
After activating the batch
function from visualization
page, proceed as in the
aside example.
VISUALIZATION PAGE WITH BATCH FUNCTION ENABLE
PROGRAMMING BATCH
Programming formula n°
product Name
Batch in progress
Visualizations:
1) batch off: n° batch effected
2) batch on: decrease safety timer
3) programming: programming safety timer
indefinite if timer=0 timer disabled
Programming batch quantity
Visualization batched product
Input key code
Choose the formula number for associate
quantity batch (between 00 and 15)
Input quantity product for each batch
Input product name for batch (max 8 characters.)
Input maximum time for batch
If timer = 0, safety timer disabled max time set
= 6000 sec.
N.B. if to one output is assigned the function of
batch alarm, to the attainment of the maximum
time, beyond to the interruption of the batch,
will have activated also the alarm output
From the visualization pages
ENABLE BATCH
Enable one of the following functions to enable and program the batch on the converter:
‰ POS. 5.7-8-9: START/STOP batch from input
‰ POS. 6.1-2-3-4: assign one of the functions to one of two output
Some examples of operation of such functions are visualized from page 14