Controlled Products Systems Group SL58510011G3 - Manual (Page 38)

38
S A F E T Y A C C E S S O R I E S F O R S E C O N D A R Y
E N T R A P M E N T P R O T E C T I O N
The following devices are acceptable for Safety Accessories for
secondary entrapment protection.
PHOTO-ELECTRIC CONTROLS
MODEL DESCRIPTION VOLTAGE
CPS-N4 Emitter, receiver and mounting brackets - 30' (9 m) Maximum Range +24V ac/dc
AOMRON Photocell/Electric Eye - 30' (9 m) Maximum Range +24V ac/dc
SENSING EDGES
MODEL DESCRIPTION VOLTAGE
G65MG0204 Miller MG020 2-wire electric edge for gates. Sensitized on three sides. +24V ac/dc
Requires mounting channel (4' [1.2 m] long).
G65MG0205 Miller MG020 2-wire electric edge for gates. Sensitized on three sides. +24V ac/dc
Requires mounting channel (5' [1.5 m] long).
G65ME12C5 Mounting Channel - 5' (1.5 m) long.
G65MGR205 Miller MGR20 2-wire electric edge in 5' (1.5 m) lengths for 2" (5 cm) round post. +24V ac/dc
G65MGS205 Miller MGR20 2-wire electric edge in 5' (1.5 m) lengths for 2" (5 cm) square post. +24V ac/dc