beautypg.com

Jog setup – CNB IPM3063P User Manual

Page 35

background image

◎ Setup the general functions of Pan/Tilt motions.

• MOTION LOCK [ON/OFF]

- If Motion Lock is set to ON, it is impossible to set

up and delete Preset, Swing, Pattern and Group.
It is possible only to run those functions. To set
up and delete those functions, enter into OSD
menu.

• PWR UP ACTION [ON/OFF]

- Refer to “Other Functions" section.

• FRZ IN PRESET [ON/OFF]

- At start point of preset movement, camera starts freezing the image of start point.

Camera keeps displaying the image of start point during preset movement and does
not display the images which camera gets during preset movement. As soon as
camera stops at preset end point, camera starts displaying live images which it gets at
preset end point. This function availability should be different by models.

◎ Setup the Jog speed and Direction.

• AUTO FLIP [ON/OFF]

- Refer to “Other Functions" section.

• JOG MAX SPEED [1

°/sec~360°/sec]

- Sets maximum jog speed. Jog speed is inversely

proportional to zoom magnification. As zoom
magnification goes up, pan/tilt speed goes down.

• JOG DIRECTION [INVERSE/NORMAL]

- If you set this to ‘Inverse’, the view in the screen

is moving same direction with jog tilting.
If ‘Normal’ is selected, the view in the screen is

moving reversely.

◎ If Park Enable is set to ON, camera runs assigned

function automatically if there is no PTZ command
during assigned "Wait Time".

• PARK ENABLE [ON/OFF]

• WAIT TIME [1minute~4hour]

- The time is displayed with "hh:mm:ss" format and

you can change this by 1 min unit.

• PARK ACTION

[HOME/PRESET/PATTERN/SWING/GROUP]

HOME

Camera moves to home position if there is no
PTZ command during assigned "Wait Time".

◎ Match the Alarm sensor input to one of Preset

positions. If an external sensor is activated, camera
will move to corresponding preset position when
this item is predefined.

• ALARMx TYPE

[NORMAL OPEN/NORMAL CLOSE]

- Sets sensor input type.

• ALARMx ACTION

[NOT USED/PRESET 1~128]

- Assign counteraction Preset position to each

Alarm input.

MOTION SETUP

PARKING ACTION SETUP

ALARM INPUT SETUP

PARKING ACTION SETUP

PARK ENABLE

WAIT TIME

PARK ACTION

BACK

EXIT(MENU OFF)

OFF

00 :10 : 00

HOME

ALARM INPUT SETUP

ALARM 1 TYPE

ALARM 2 TYPE

ALARM 3 TYPE

BACK

EXIT(MENU OFF)

N. OPEN

ALARM 4 TYPE

ALARM 1 ACT

ALARM 2 ACT

ALARM 3 ACT

ALARM 4 ACT

N. OPEN

N. OPEN

N. OPEN

NOT USED

NOT USED

NOT USED

NOT USED

JOG SETUP

JOG SETUP

AUTO FLIP

JOG MAX SPEED

JOG DIRECTION

BACK

EXIT(MENU OFF)

ON

120 /SEC

INVERSE

MOTION SETUP

MOTION LOCK

PWR UP ACTION

FRZ IN PRESET

>

BACK

EXIT(MENU OFF)

OFF

ON

OFF

>

>

69

68

This manual is related to the following products: