Smtp setup – CNB IPM3063P User Manual
Page 26
◎
This configures mailing out method of Alarm Images once ‘event’ occurred in the
XPEED-XNET system.
Click [SMTP] button to open the page shown in below figure.
SMTP Setup
51
50
Recalls previously saved configurations.
-
Reset
Applies and saves changes.
-
Save
Enter the e-mail address of the external mail server user.
Address
Address
Setting
Enter the password of the external mail server user.
Password
Enter the use name of the external mail server.
User name
Enter the port number for the external mail server.
SMTP Port
Enter the name of external mail server.
SMTP Server
Name
Enables or disables the use of SMTP authorization when using external
mail server.
Enable
SMTP
Authorization
Turns internal SMTP Server on or off.
When this box is checked, Alarm Image gets mailed out through an
internal mail server. Mail Authentication cannot be used in this mode.
When this box is unchecked, Alarm Image gets mailed out through an
external mail server. Mail Authentication, port, user. Password, mail
address, etc needs to be configured.
Enable
Internal SMTP
Server
SMTP
Settings
DESCRIPTION
ITEM