CNB IPM3063P - Manual (Page 31)

• Function : By using Swing function, you can make camera to move between 2 Preset
positions repeatedly. When swing function runs, camera moves from the
preset assigned as the 1st point to the preset assigned as the 2nd point in
CW(Clockwise) direction. Then camera moves from the preset assigned as
the 2nd point to the preset assigned as the 1st point in CCW(Counterclock
wise) direction.
In case that the preset assigned as the 1st point is same as the preset
assigned as the 2nd point, camera turns on its axis by 360 ° in CW(Counter
wise) direction. Speed can be set up from 1°/sec to 180°/sec.
• Set : To set Swing, use OSD menu.
• Run : Run Swing [1~8]
• Delete : To delete Swing, use OSD menu.
• Function : Pattern Function is that a camera memorizes the path (mostly curve path)
by screen jog for assigned time and revives the path exactly as it
memorized. 4 Patterns are available and Maximum 1200 communication
commands can be stored in a pattern.
• Setting : Pattern can be created by one of following two methods.
Method 1) [Pattern NO.]
- Pattern editing screen is displayed as bellow.
- Movement by direction key and preset movement
can be memorized in a pattern.
- The rest memory size is displayed in progress bar.
- To save the recording, press NEAR or STORE key
and to cancel, press FAR key.
Method 2) OSD using OSD menu: See the section “How to use OSD menu”.
• Run : Run Pattern [1~4]
• Delete : To delete Pattern, use OSD menu.
• Function : The group function allows running sequence of Presets, Pattern and/or
Swings. Max 8 group can be stored. Each group can have max 20 action
entities which can be preset, pattern or swing. Preset speed can be set up
and the repeat number of Pattern & Swing can be set up in Group setup.
Dwell time between actions can be set up also.
• Set : Use OSD menu to create a Group.
• Run : Run Group [1~8]
• Delete : To delete Group, use OSD menu.
SWING
PATTERN
GROUP
Preset 1 Pattern 1 Swing 1
DWELL TIME
Max. 20 Action
EDIT PATTERN 1
[NEAR:SAVE /FAR:DELETE ]
■■■■■■ ■■■■■■ ■■■■■■■
0/0/x1/N
61 60
1st Preset
2nd Preset
①
C W
d ire
ct io n
②
C C W
d ire
ct io n