INTELLINET NETWORK 560559 16 Ports Gigabit + 2 Gigabit SFP PoE+ Web Management Ethernet Switch User Manual - Manual (Page 8)

8
CHAPTER 2 System
System Information
To look up system information in the Web browser, click System, then Information.
Web Smart switch interface
Figure 4: System Information
IP Address Setting
To set up a static IP address for the switch.
Web Smart switch interface
1. Click System, then IP Setting.
2. Set the Mode to “Static IP.”
3. Specify the IP address, subnet mask and gateway address.
4. Click Apply.
Figure 5: IP Setting