beautypg.com

Vlan stacking setting – INTELLINET NETWORK 560559 16 Ports Gigabit + 2 Gigabit SFP PoE+ Web Management Ethernet Switch User Manual User Manual

Page 19

background image

19  

 

VLAN Stacking Setting

After configuring port members for stacking VLANs on the switch, the ports connected to a service provider

network need to be enabled as double-tagged ports. Also, the Tag Protocol Identifier (TPID) value must be set for

the double-tagged ports to identify 802.1Q tagged frames.

Web Smart switch interface

To manage stacking VLAN port settings,

1.

Click Configuration, VLAN Stacking, S-VLAN Setting.

2.

Specify the Tag Protocol ID number.

3.

Set the stacking PVID for service provider ports and configure them as “Enabled.”

4.

Click Apply.

Figure 15: VLAN Stacking Setting