INTELLINET NETWORK 560559 16 Ports Gigabit + 2 Gigabit SFP PoE+ Web Management Ethernet Switch User Manual - Manual (Page 17)

17
VLAN Port Setting
Arranging VLAN attributes for specific interfaces, including the default Port VLAN identifier (PVID).
Web Smart switch interface
To specify attributes for VLAN port members,
1. Click Configuration, VLAN, VLAN Setting.
2. Select one or more ports or trunks to configure.
3. Configure the required PVID setting.
4. Click Apply.
Figure 13: VLAN Port Setting
Hint
The following parameters are shown on the Static VLAN Table Setting screen:
■ Port – Lets you select one or more ports to configure. Hold down the CTRL key and click port numbers to
select multiple ports. Hold down the SHIFT key to select a range of ports.
■ PVID - The VLAN ID assigned to untagged frames received on the interface. (Range: 1-4095, Default: 1) Ports
must be a member of the same VLAN as the Port VLAN ID.