Hach-Lange DR 6000 Basic User Manual - Manual (Page 165)

English 165
The Wavelength Scan is complete, if
• the graph is shown full-size,
• the scaling of the x-axis occurs automatically,
• the Cursor functions in the vertical navigation bar are
highlighted.
• a sound is emitted
• To save the scan, press Options > Store symbol.
Time course of absorbance/transmittance
The Time Course mode is used to collect data in either absorbance or
transmittance for a user-specified length of time. This data can be
displayed in either a graph or a table.
Time course setup parameters
1. Press Time Course mode in the Main Menu.
2. Press Options to configure parameters.
Table 6 Time course options
Options Description
More For further options
Folder icon To store the scan data
Time & Interval
To input the total time for data collection and the time interval
between the collection of data points
λ To input the wavelength setting
View Table
To display readings in absorbance, transmittance or
concentration. This can be changed after sample data is
collected
Timer icon
This functions as a stopwatch. It helps to make sure that the
steps of an analysis are correctly timed (e. g. reaction times,
wait times, etc., can be exactly specified). When the
specified time has elapsed, a sound is emitted. The use of
the timer has no influence on the reading program.