Clear-Com Concert for Newsroom - Manual (Page 5)

5 Concert Client User Guide for Mac
1 Setting up the Client
Clear- Com Concert™ is a multi-user conferencing and intercom application. This guide
describes how to set up and use Concert Client v2.7 for Mac.
Before setting up the Concert Client, ensure that:

The Concert server has been installed and configured
(see the Concert Server Installation Guide).

Your system meets the minimum recommended requirements (see below).
Note:
For all Concert v2.7 release software and documentation, see your Concert DVD.
1.1 System requirements
Mac OS X Leopard v10.5, Snow Leopard v10.6
Processor Intel ® Core ® 2 Processor (2.4GHz or 2.66GHz) or comparable
Memory RAM 2GB
Hard Drive 60MB free hard disk space
Network Card 100MB Ethernet interface or better
Audio Device Built-in (on board) audio device
USB headsets
USB conference phones
Table 1: System requirements
1.2 Installing the Client
To install the Concert Client:
1. Insert the Concert DVD into the DVD drive.
2. Do either of the following:

Click the DVD on the desktop.

Go to Finder > Devices and open the DVD.
3. In the Concert DVD, go to Concert > Client > Mac. Click the Concert .dmg file.