Clear-Com Concert for Newsroom - Manual (Page 16)

16 Concert Client User Guide for Mac
1.8 Interfaces [ ]
Use the Interfaces [ ] dialog to configure the hardware ports used by locally connected audio
devices.
Before you can configure interfaces:

Your system administrator must enable your ability to configure interfaces.

You must be logged into the Concert Server.
To configure the Interfaces:
1. Do either of the following:

From the Concert menu bar, select Concert > Preferences. In the Preferences
dialog, select Interfaces [ ].

In the Client console, click the Preferences (configuration) icon [ ]. In the
Preferences dialog, select Interfaces [ ].
2. In Input, select your audio input device from the drop-down list. The hardware ports
available to that type of device are displayed.
3. To assign a channel to a port, click Select a Channel. Select a channel from the
drop-down list.
Note:
Only those channels associated with your role (as configured by your system
administrator) are displayed in the drop-down list.
4. To re-establish the channel configuration for a port every time you log in (or when
you connect the device to the Mac, while logged in), select Auto Connect.
5. To connect or disconnect channels, use the following buttons:
Button
Description
Action Manually connect or disconnect individual channels.
Connect All Connect all channels for this Client.
Disconnect All Disconnect all channels for this Client.
Table 5: Interfaces: Connection buttons
Note:
Status shows the connection status for each channel.
6. In Output, repeat steps 2 to 5 for audio output devices.
Note:
Changes to the Interfaces dialog are implemented automatically. Save and Cancel are only
used to save and cancel changes to other dialogs.