Clear-Com Concert for Newsroom - Manual (Page 36)

36 Concert Client User Guide for Mac
3.4 Configuring the Intercom Panel for Eclipse
You must use the Eclipse Configuration System (ECS) to configure Eclipse keys. Eclipse keys
configured by ECS are automatically displayed on the panel when it is opened.
To show that the Intercom Panel is connected with Eclipse, the ECL icon in the upper right of the
panel is displayed as green [
].
For more information about Eclipse and ECS, see the Eclipse documentation (including manuals) at
www.clearcom.com .
Important note :
In Eclipse mode, the Intercom Panel can contain both Concert and Eclipse keys, allowing you to
connect with both Concert and Eclipse users.
3.5 Using the Intercom Panel with Eclipse
Eclipse keys in the Intercom Panel behave as hardware pushbuttons. Eclipse keys have a fixed
function:
Eclipse key
Function
Talk.
Listen.
Talk and listen.
Table 17: Eclipse keys
Note :
In a situation where the position of a Concert button on the Intercom Panel conflicts with the position
of an Eclipse button, the Eclipse button always overrides (replaces) the Concert button.
3.5.1 Making a call
To call an Eclipse user, conference or program feed:
1. Click (push) the appropriate Eclipse key. The Eclipse key lights up.
2. To adjust the volume, right-click the Eclipse key. Use the slider on the Eclipse key to
increase or decrease the volume.
3. To end the connection, click (push) the Eclipse key.