Clear-Com Concert for Newsroom - Manual (Page 37)

37 Administrator Guide
5.6.5 Associating a channel with a conference
When you associate a channel with a conference, the channel automatically joins the conference (with
the specified permissions) upon connection.
When you connect the channel, all audio sent to or received by that channel is also routed through the
specified conference. See also 5.5.5 Associating a conference with a channel.
To associate a channel with a conference (Conference Associations):
1. Do either of the following:

In the Channels page (Channel Table) locate the required channel (for example, Program
Feed). In Action, click the Name of the channel.

Click the information pages [ ] for the channel, located under the Channels page
(Channel Table).
2. Click the Conference Associations tab.
3. The Conference Associations page is displayed, listing all the conferences in the partition.
Make any changes you require to the permissions granted to the channel on joining a conference.
4. Click Submit.
5.6.6 Associating users with a channel
Associating a channel with a user places the channel (with the specified access permissions) in the
Channels tab of the user’s Concert Client.
Note:
This action only grants the user talk/monitor privileges to the channel, not configuration rights.
To associate a user with a channel (User Associations):
1. Do either of the following:

In the Channels page (Channel Table) locate the required channel
(for example, Program Feed). In Action, click the Name of the channel.

Click the information pages [ ] for the channel, located under the Channels page
(Channel Table).
2. The User Associations page is displayed, listing all the conferences in the partition. Make any
changes you require to the permissions granted to the user on joining a specific channel.
3. Click Submit.