Clear-Com Concert for Newsroom - Manual (Page 20)

20 Administrator Guide
8. In Connection Quality, select the audio quality level for interface connections. Select from the
following:
Connection
Description
LAN Concert is used on a corporate LAN (same office). High and
stable bandwidth. High audio quality but more bandwidth is used.
WAN Concert is used on a corporate WAN (controlled network
environment). Bandwidth may be lower between two offices or
sites. Audio quality sacrificed for a greater amount of recovery.
Internet Concert is used on a wireless, low bandwidth or poor quality
Internet connection. Bandwidth is uncontrolled, unstable and low.
Audio quality is lower. Audio quality sacrificed for the highest level
of recovery.
Table 5: Interface Gateway: Connection Quality
9. In Advanced Settings, you can select (or leave unselected) the following audio QoS settings:
Connection
Description
Silence
suppression Helps reduce bandwidth usage by preventing noise from being
passed across the network when participants in a call, conference
or channel are not speaking (disabled by default).
Automatic Gain
Control (AGC) Adjusts the gain to an appropriate level for a range of input signal
levels (disabled by default).
Table 6: Interface Gateway: Advanced Settings
Note:
Both silence suppression and AGC should be disabled if the audio source for your channel is
either music or another continuous audio source.
10. Click Submit.
To remove an Interface Gateway:
1. In Action, click [remove].
2. A message is displayed [ ] asking if you want to remove the Interface Gateway. Click OK.