Clear-Com Concert for Newsroom - Manual (Page 36)

36 Administrator Guide
5.6.2 Removing channels
To remove a channel:
1. Locate the channel you want to remove in the list. In Action, click [remove].
2. A message is displayed [ ] asking if you want to remove the channel. Click OK.
5.6.3 Modifying the details of a channel
To modify the channel details:
1. Locate the channel you want to modify in the list. In Action, click [modify].
2. The Details page for the channel is displayed. Make any changes you require.
3. Click Submit.
5.6.4 Associating a Client channel with a role
Associating Client channels to a role grants any user associated to that same role, local configuration
privileges for that channel. Provided the user is also Interface enabled, the user can connect the channel
locally, using the Configuration > Interfaces dialog in the Concert Client (see the Concert Client User
Guide).
Important note:
Server channels are used exclusively by the Interface Gateway servers and are therefore not associated
with roles.
To associate a Client channel to a role (Role Associations):
1. Do either of the following:

In the Client Channels page (Channel Table) locate the required channel (for example,
Program Feed). In Action, click the Name of the channel.

Click the information pages [ ] for that channel, located under the Client Channels
page (Channel Table).
2. Click the Role Associations tab.
3. The Role Associations page is displayed, listing all the roles in the partition. Configure the
permissions granted to particular roles.
4. Click Submit.