Clear-Com LMC-64 - Manual (Page 17)

Clear-Com
Eclipse Median Instruction Manual 1 - 5
IVC-32 IP Interface
The IVC-32 interface allows the Eclipse matrix to connect to IP
enabled V-Series panels and Concert users via an IP network.
Each IVC-32 interface consists of a front card with a reset button and
various status indicators, and a rear card with eleven RJ45 ports giving
eight E1/T1 ports (not used), DECT sync in and out (not used) and a
LAN port for IP connectivity.
Each IVC-32 front card has status LEDs for power, port activity and
LAN status. The LAN indicators show whether there is a LAN
connection and the IP activity on the LAN port.
The IVC-32 cards must be fitted in the rightmost available slots
(furthest away from the CPU cards) on the Median and up to four
IVC-32 interfaces can be fitted to a matrix.
LMC-64 Interface
The LMC-64 interface allows the Eclipse matrix to provide Production
Maestro Pro clients with audio level metering of Party Lines
(Conferences) and 4-Wire ports via an IP network.
Each LMC-64 interface consists of a front card with a reset button and
various status indicators, and a rear card with eleven RJ45 ports giving
eight E1/T1 ports (not used), DECT sync in and out (not used) and a
LAN port for IP connectivity.
Each LMC-64 front card has status LEDs for power, port activity and
LAN status.
The LAN indicators show whether there is a LAN connection and the
IP activity on the LAN port.
The LMC-64 cards must be fitted in the rightmost available slots
(furthest away from the CPU cards) on the Median and up to four
LMC-64 interfaces can be fitted to a matrix.
Interface Modules
An interface module converts the 4-wire signals transmitted from the
matrix to other types of signals that communicate with such external
devices as telephones, camera intercoms, two-way radios, and so on.
In this way, non-4-wire devices can communicate with the matrix.
The Median houses any of the following interfaces modules:
• FOR-22. A two-channel, universal 4-wire interface with transformer
isolation, opto-isolation for logic input, and relay contacts for relay
out.
• CCI-22. A two-channel, isolated translator of 4-wire audio from the
matrix to two-wire intercom circuits, such as Clear-Com party line
products.