Clear-Com RS-603 (No longer available) - Manual (Page 51)

V - P A C K I N S T R U C T I O N M A N U A L
7 - 1
SAVING AND CLONING SETUPS
AND OTHER V-PACK FEATURES
V-Pack offers additional features for making creating and editing setups quicker
and more efficient:
• After you create a beltpack setup, you can save the setup for future use, or copy
the setup to quickly upload it to one or more beltpacks.
• To keep track of multiple beltpacks, you can create and assign unique
identification numbers to them.
• If you wish to return a mode to its default settings, you can do so from the
Beltpack Setup dialog box.
SAVING A BELTPACK SETUP AS A COMPUTER FILE
With V-Pack, you can save a beltpack mode or setup as a computer file. You can
then store the file on your computer to later retrieve and edit in V-Pack, or to
upload to a beltpack.
NOTE: A complete setup consists of four modes.
To save a beltpack mode or setup:
1. Create a beltpack mode or setup (four modes) in V-Pack, either online or
offline. See Chapter 3 for instructions.
2. On the Beltpack Setup screen, click Save File.
The Saving dialog box appears. as shown in Figure 1.
Figure 1: Saving a Mode or Setup
3. In the Saving dialog box, click the mode or modes you wish to save.
4. Click Save As.
The Save As dialog box appears.
5. Navigate to the file and folder in which you wish to save the mode or setup.
6. Click Save.
The mode or setup is saved as a computer file in the destination you specified.
.
A complete beltpack setup
consists of four modes.
7