Clear-Com RS-603 (No longer available) - Manual (Page 25)

V - P A C K I N S T R U C T I O N M A N U A L
4 - 7
Steady Call Light When you select the Steady Call Light check box, the
beltpack’s call light remains on for the duration of the call signal. You can select
this option for one or both channels.
• If you select the AC check box for a channel, an incoming AC call signal for
that channel appears a as a steady call light at the beltpack. If you click to clear
the AC check box, you cannot receive an AC call signal on that channel at the
beltpack.
• If you select the DC check box for a channel, an incoming DC call signal on
that channel appears as a steady call light at the beltpack. If you click to clear
the DC check box, you cannot receive a DC call signal on that channel at the
beltpack.
Flashing Call Light When you select the Flashing Call Light check box, the
beltpack’s call light flashes for the duration of the call signal. You can select this
option for one or both channels.
• If you select the AC check box for a channel, an incoming AC call signal for
that channel appears a as a flashing call light at the beltpack. If you click to
clear the AC check box, you cannot receive an AC call signal on that channel
at the beltpack.
• If you select the DC check box for a channel, an incoming DC call signal on
that channel appears as a flashing call light at the beltpack. If you click to clear
the DC check box, you cannot receive a DC call signal on that channel at the
beltpack.
Call Light Dim When you select the Call Light Dim check box, the beltpack’s
call light does not glow as brightly as usual for the duration of the call signal,
regardless of whether the call light is steady or flashing. You can select this option
for one or both channels.
• If you select the AC check box for a channel, an incoming AC call signal for
that channel appears a as a dimmed call light at the beltpack. If you click to
clear the AC check box, you cannot receive an AC call signal on that channel
at the beltpack.
• If you select the DC check box for a channel, an incoming DC call signal on
that channel appears as a dimmed call light at the beltpack. If you click to clear
the DC check box, you cannot receive a DC call signal on that channel at the
beltpack.
This feature is useful when you need to save current in high power-demand
environments. It is also helpful in preventing the momentarily impaired vision
some people experience after viewing a bright light in a darkened environment.
Note: Any time a dual-channel beltpack receives two incoming call signals at the same
time, the call lights for both channels automatically dim to prevent excessive power
consumptions. You do not have to select Call Light Dim for this to occur.
Call Tone When you select the Call Tone check box, a beeping tone sounds in
the beltpack’s headset for the duration of the call signal. You can select this
option for one or both channels.