Clear-Com RS-603 (No longer available) - Manual (Page 45)

V - P A C K I N S T R U C T I O N M A N U A L
6 - 1
CHOOSING ADVANCED SETUP OPTIONS
Advanced beltpack setup options give you even more flexibility in operating a
beltpack. For example:
• You can limit a beltpack user’s access to the beltpack’s onboard functions.
Locked out functions are not available on the beltpack until they are restored
through V-Pack.
• You can select among available computer ports for connecting the VPC-1
programming cable.
• On dual-channel beltpacks, you can select between RTS-compatible and
ClearCom-compatible line levels.
These options differ for single-channel and dual-channel beltpacks. The
following sections describe advanced setup options for each.
SETUP OPTIONS FOR A SINGLE-CHANNEL BELTPACK
When you select Advanced from either the Beltpack Setup dialog box, or from
any of the Options screens, the Advanced Options dialog box appears, displaying
the options for a single-channel beltpack, as shown in Figure 1.
Advanced Options are “global”—they apply to all four of a beltpack’s modes. You
can only choose one set of options per beltpack, unlike the Operation or Headset
options, which you can customize for each of the four modes.
Figure 1: Advanced Setup Options for a Single-Channel Beltpack
Advanced setup options
differ for single-channel and
dual-channel beltpacks.
6