Burkert Type 8072 - Manual (Page 6)

4
Intendeduse
2. inTenDeD use
use of the flow threshold Detector / flowmeter that does
not comply with the instructions could present risks to
people, nearby installations and the environment.
• The flow Threshold detector / Flowmeter is intended solely to
measure the flow rate of liquids.
• Protect the device from electromagnetic perturbations, ultra-
violet radiations and, when installed outside, from the effects of
climatic conditions.
• Use this device in compliance with the characteristics and
commissioning and use conditions specified in the contractual
documents and in the instruction manual.
• Requirements for safe and proper operation are proper trans-
port, storage and installation as well as careful operation and
maintenance.
• Only use the device as intended.
• Observe any existing restraints when the device is exported.
3. bAsic sAfeTy informATion
This safety information does not take into account:
• any contingencies or occurences that may arise during assembly,
use and maintenance of the devices.
• the local safety regulations that the operator must ensure the staff
in charge of assembly observe.
Danger due to high pressure in the installation.
Danger due to electrical voltage.
Danger due to high temperatures of the fluid.
Danger due to the nature of the fluid.
various dangerous situations
To avoid injury take care:
• to prevent any accidental power supply switch-on.
• to carry out installation and maintenance by qualified and skilled
staff with the appropriate tools.
• to guarantee a defined or controlled restarting of the process,
after a power supply interruption.
English
intended use