Burkert Type 8072 - Manual (Page 21)

19
Installationandwiring
7.3.3. Wiring a version with 2 transistor
outputs and a 5-pin m12 male fixed
connector
danger
risk of injury due to electrical voltage
• Always plug in and tighten the connectors correctly.
1 2
4 3
5
1: V+ (12-36 V DC)
2: NPN transistor output
3: 0 V DC
4: PNP transistor output
5: Functional earth
The position of the 5-pin M12 fixed connector is adjustable:
→
Unscrew the locknut.
→
Turn the fixed connector to the desired position, by 360° max. to
prevent the cables from twisting inside the housing.
→
Tighten the locknut using a spanner, while keeping the fixed
connector in the desired position.
Fig. 15: Allocation of the pins on the 5-pin M12 fixed connector
Power cable shield Load
(solenoid valve,
for example)
Power supply
PNP transistor
output
12-36 V DC
+ -
+ -
1
3
2
(*)
V+
0 V DC
Fig. 13: NPN wiring of the transistor output of a version with
EN 175301-803 fixed connector
Power cable shield Load
(solenoid valve,
for example)
Power supply
NPN transistor
output
12-36 V DC
+ -
1
3
2
(*)
V+
0 V DC
+ -
Fig. 14: PNP wiring of the transistor output of a version with
EN 175301-803 fixed connector
(*) Functional earth
English
installation and wiring