Burkert Type 8072 - Manual (Page 18)

16
Installationandwiring
Flow velocity
Flow
rate
gpm
1000
500
200
20
10
5
2
1
0.5
0.2
0.1
0.05
0.02
0.01
30 20 0.3 0.5 1 2 3 5 10
DN50 (DN65)*
DN40 (DN50)*
DN32 (DN40)*
DN25 (DN32)*
DN20 (DN25)*
DN15 (DN15 / DN20)*
100
50
fp s
DN08
DN06
* for the following fittings:
- with external threads acc. to SMS 1145.
- with weld ends acc. to SMS 3008, BS 4825 / ASME BPE or
DIN 11850 Rg2.
- with clamp connections acc. to SMS 3017 / ISO 2852 or
BS 4825 / ASME BPE or DIN 32676.
7.2.2. Assembly of the 8032 / 8072
The electronic module SE32 only detects one rotation
direction of the oval gears of a fitting S070.
• If the 8072 does not run properly, once assembled and
energized, do the following:
→
remove the SE32 from the S070,
→
turn the electronic module SE32 by 180°,
→
insert the SE32 back into the S070.
→
Install the fitting in the pipe according to the installation instruc-
tions provided with the fitting.
→
To assemble the electronic module with the fitting, follow the
instructions given in Fig. 9.
SE32
S030
1
2
3
SE32
S070
1
2
FLOW
Fig. 9: Assembling the SE32 with the fitting S030 or S070
English
installation and wiring