Burkert Type 8694 - Manual (Page 18)

18
Electricalinstallation
9.2.2. Electrical installation 24 V DC with
circular plug-in connector
→
Connect the positioner according to the table.
6
1
7
5
4
3
2
8
Fig. 11: Circular plug M12 x 1, 8-pole
Pin Wire color 4) Designation
1 white Set-point value + (0/4 - 20 mA)
2 brown Set-point value GND
3 green Supply voltage GND
4 yellow Supply voltage + 24 V DC
5 grey Binary input +
6 pink Binary input GND
7 blau Analogue position feedback GND 5)
8 rot Analogue position feedback + 5)
Tab. 4: Connection with circular plug-in connector
4)
The indicated colors refer to the connecting cable available as an
accessory (919061).
5)
Only option.
9.3. Electrical installation AS Interface
A detailed description of the bus communication can be
found in the operating instructions Type 8694.
9.3.1. Connection with circular plug-in
connector M12 x 1, 4-pole, male
Connector views
The views show the image from the front looking at the pins, the
solder connections are behind them.
Pin 4:
NC
Pin 1:
Bus +
Pin 3:
Bus –
Pin 2:
NC
Fig. 12: Bus connection without external supply voltage
Pin 4:
24 V +
Pin 1:
Bus +
Pin 3:
Bus –
Pin 2:
GND
Fig. 13: Bus connection with external supply voltage (optional)
english
Type 8694