Burkert Type 8691 - Manual (Page 24)

24
Electrical installation
→
Set the DIP switches according to the following tables.
DIP switches
for bus address
and baudrate
Fig. 21: DIP switches DeviceNet
8 DIP switches are available for configuration:
• DIP switches 1 to 6
for the DeviceNet address
• DIP switches 7 to 8 for the baudrate
settings of the devicenet address
MAC ID – Medium Access Control Identifier:
[DIP 1=off=0 / DIP 1=on=1 /
MAC ID=DIP 1*2
0 +DIP 2*2 1 +...+DIP 6*2 5 ]
dip 1
[20=1] dip 2
[21=2] dip 3
[22=4] dip 4
[23=8] dip 5
[24=16] dip 6
[25=32]
mac id
off off off off off off 0
on off off off off off 1
off on off off off off 2
... ... ... ... ... ... ...
off on on on on on 62
on on on on on on 63
Tab. 9: Settings of the DeviceNet address
setting the baudrate
Adjusting the control head to the baudrate of the network.
dip 7 dip 8 Baudrate
off off 125 kBaud
on off 250 kBaud
off on 500 kBaud
on on not permitted
Tab. 10: Setting the baudrate
If the settings are changed by actuating the DIP switches,
this change will not take effect until the device is restarted.
english
Type 8691