Advanced controls (cr-415) – Arcam DV27A User Manual
Page 15

14
15
E
n
g
li
sh
P
MODE
STATUS
SRCH
ZOOM
ANGLE
SUBT
PL
AUDIO
TRIM
TITLE
RTN
MEM
Advanced controls (CR-415)
P MODE
Press
P MODE
to toggle random playback
SRCH (search)
It is possible to access any point on the disc
directly using the ‘Search’ menu.
Press
SRCH
to access the ‘Search’ menu.
RTN (return)
Press
RTN
to move back through the DVD ‘Disc’
and ‘Title’ menus. Note that this feature is only of
use with discs using multi-level menus.
STATUS
Press
STATUS
once to show the elapsed and remaining
time of the disc. Press
STATUS
a second time to give play
status information about the current disc. Press
STATUS
a
third time to close the status display.
The status information displayed varies depending on the
type of disc – DVD, CD or VCD.
MEM (memorise)
It is possible to ‘bookmark’ up to three points on
a DVD title, so you can quickly jump to those
parts of the title again. Press
MEM
to access the
‘Bookmark’ menu.
TITLE
Press
TITLE
to access the DVD’s ‘Title’ menu. Note that
this feature only applies to multi-title discs.
AUDIO
Some DVDs offer the facility to select different audio
tracks. Press
AUDIO
to cycle through the available tracks.
The TV displays the number, language and type of audio
track, e.g. ‘1 Eng DD 6CH’.
SUBT (subtitle)
Press
SUBT
on the remote control to cycle through the available
subtitle languages, including ‘OFF’. Some discs force subtitles on, over-
riding player set up.
ANGLE
Some DVDs offer the facility to select different camera angles. If
this feature is available the ‘camera’ symbol lights in the display.
Press
ANGLE
to cycle through the available angles.
ZOOM
Press
ZOOM
to enlarge a particular area of
the picture. Each press of the
ZOOM
button
increases the zoom, normally until a maximum
of 4x enlargement is reached (although the
amount of zoom possible varies depending on
the type of disc: in some cases no zooming is
possible). Pressing
ZOOM
when the maximum
enlargement has been reached returns the image
to normal size.
While using the zoom function, the cursor pad
can be used to move around within the image.
The zoom function can also be used when
playback is paused.
Note that a zoom level of x1.25 is particularly
useful if the output from the DVD player is in
a screen format different from that of your TV.
A zoom of x1.25 when a ‘widescreeen’ image is
displayed on a 4:3 TV causes the bars at the top
and bottom of the screen to disappear (although
the sides of the image are lost); a zoom of x1.25
when a 4:3 image is displayed on a widescreen
TV causes the bars at the side of the image to
disappear (although the top and bottom of the
image are lost).
PL (Pro Logic)
This button allows the Pro Logic processing
to be changed on-the-fly (while playback is in
progress). Press the button once to see the
current processing mode (assuming that the
OSD is switched on), then again to change to
the next mode. See page 9 for a description of
each Pro Logic setting.
TRIM
This button brings up a menu very similar to the ‘Trims’ page in the
Set-up menu (as described on page 11). It allows on-the-fly changes
to the relative volume of each speaker in your system, while a disc is
being played.
For a full description, see page 11.