Burkert Type 2702 - Manual (Page 6)

6 - 2702
G
eneral
n
otes
english
The following symbols are used in these operating instructions:
marks a word step that you must carry out.
SymbolS
danGer!
means an immediate danger. If it is not avoided, death or serious injury (maiming)
will result.
WarnInG!
means a possibly dangerous situation. If it is not avoided, death or serious injury may
result.
CautIon!
means a possibly dangerous situation. If it is not avoided, light injury may result. May also
be used for warnings regarding property damage.
attentIon!
means a possibly damaging situation. If it is not avoided, the product or its surroundings
may be damaged.
note marks important additional information, tips and recommendations.
General.Safety.noteS
This device may only be used in combination with third-party devices and components recommended or
approved by Bürkert.
The proper function and safe operation of this product depends on professional transportation, professional
storage, installation, and mounting, as well as on careful operation and maintenance.
In order for the device to function perfectly and have a long service life, you must observe the information gi-
ven in these operating instructions and comply with the operating conditions and the permissible data which
is specified in the „Technical Data“ chapter of these instructions.
On non-observances of these notes and unauthorized interference with the device, we will refuse all liability
and the warranty on device and accessories will become void!
The device is only to be used as a process regulation valve. Any other use is not considered the intended
use. Bürkert is not responsible for any damages resulting from such use. The user bears all risk.
Intended.uSe
• Switch off the supply voltage in all cases before intervening in the system!
• Note that in systems under pressure, piping and valves may not be loosened!
danGer!
WarnInG!
• Observe the current regulations on accident prevention and safety during operation and
maintenance of the device!