Brooks Instrument QMBM User Manual
Page 8
Installation and Operation Manual
X-CM-QmB-eng
Part Number: 541B029AAG
June, 2011
QmB Series IP40, IP66, IP66XP
QS-5
Refer to the X-Qm-HART Installation and Operation Manuals for complete wiring of a Brooks Quantim for HART interface.
HART Communications is provided on the Primary Output of the Brooks Quantim device. Connecting a HART Communicator,
or any HART modem, requires a connection between pins 4 and 1 as shown below. This connection can be anywhere on the
current loop.
Proper wiring of a Brooks Quantim NEMA 1 / IP40
Proper wiring of a Brooks Quantim NEMA 4X / IP65
Quick Start Instructions for Connecting HART on 4-20 mAmp I/O
®
DB15 Connector
This manual is related to the following products: