Brooks Instrument QMBM - Manual (Page 27)

Section 2 Installation
2-1
Installation and Operation Manual
X-CM-QmB-eng
Part Number: 541B029AAG
June, 2011
QmB Series IP40, IP66, IP66XP
2-1 General
2-2 Receipt of Equipment
When the instrument is received, the outside packing case should be
checked for damage incurred during shipment. If the packing case is
damaged, the local carrier should be notified at once regarding their
liability. A report should be submitted to your nearest Product Service
Department.
Brooks Instrument
407 W. Vine Street
P.O. Box 903
Hatfield, PA 19440 USA
Toll Free (888) 554-FLOW (3569)
Tel (215) 362-3700
Fax (215) 362-3745
E-mail: [email protected]
http://www.BrooksInstrument.com
Brooks Instrument Brooks Instrument
Neonstraat 3 1-4-4 Kitasuna Koto-Ku
6718 WX Ede, Netherlands Tokyo, 136-0073 Japan
P.O. Box 428 Tel 011-81-3-5633-7100
6710 BK Ede, Netherlands Fax 011-81-3-5633-7101
Tel 31-318-549-300 Email: [email protected]
Fax 31-318-549-309
E-mail: [email protected]
Remove the envelope containing the packing list. Carefully remove the
instrument from the packing case. Make sure spare parts, accessories and
documentation are not discarded with the packing materials. Inspect for
damaged or missing parts.
2-3 Recommended Storage Practice
If intermediate or long-term storage is required, it is recommended that the
instrument be stored in accordance with the following:
a. In the original vacuum bag and shipping container.
b. In a sheltered area with the following conditions:
Ambient temperature 70
0 C (160 0 F) maximum and 0 0 C (32 0 F) minimum.
c. Relative humidity 45% nominal, 60% maximum, 25% minimum.
Upon removal from storage a visual inspection should be conducted
to verify the condition of equipment is "as received".