Brooks Instrument QMBM - Manual (Page 30)

Section 2 Installation
2-4
Installation and Operation Manual
X-CM-QmB-eng
Part Number: 541B029AAG
June, 2011
QmB Series IP40, IP66, IP66XP
2-8 Process Mounting
The Brooks Quantim will function in any orientation if the Coriolis sensor and
the control valve remain filled with process fluid. Entrapped gas in a liquid
application and entrapped liquid in a gas application should be prevented as
it may disturb the Coriolis sensor and the control valve.
Install the Brooks Quantim in the direction of the FLOW arrow.
The arrow indicating proper flow direction is engraved on the front of the
instrument between the process fittings. (See Figure 2-1 below.)
Figure 2-1 Flow Direction Through the Quantim, as Indicated by the Arrow
Engraved on the Meter/Controller Body.