FlexLink X65 Функциональные модули Руководство пользователя User Manual
Page 29
Functions
Created by EBCCW 00:06
21
8050179
Straight passing through:
A pallet on Highway is approaching. The pallet activates sensor B1 which
actuates stop A1 which stops the pallet if function is occupied. Sensor B3
and B4 supervise the function area. If both sensors gives low signal the
area is empty.
Function occupied:
Before a pallet is let into the function the previous flow must be finished, the
arm to be in right position and downstream receiver be ready to receive.
Example: Previous flow was straight. Pallet enters on Satellite (M) to be
merged. Stop A1 block the flow, then wait until B3 and B4 do not detect any
pallets. When downstream Highway is ready to receive, then pallet on Sat-
ellite (M) is released by stop A2.
Sensors:
The primary function of in position sensors (B1, B2) is to detect pallet
placed in specific position. Additionally the sensors are placed in the way
they can actuate stop (open/blocking) before pallet gets into contact with
the stop up to conveyor speed 20 m/min.
RFID:
The RFID head B7 can be used to read/write RFID tag data on pallet. The
data can be used to take flow decisions at crossings, for example at stop
A1