Aiwa XR-MR5 - Manual (Page 7)

ENGLISH
7
En
PREP
ARA
TIONS
MULTI JOG
ENTER/ILLUMINATION
DEMO/ECO
DIMMING THE DISPLAY
WINDOW BRIGHTNESS
(DIMMER)
The display window brightness can be adjusted to the following
four levels: "DIM-OFF", "DIMMER 1", "DIMMER 2", and "DIMMER
3".
"DIM-OFF" is the brightest level.
When "DIMMER 3" is selected, the display is darkest, all button
lamps go off, and the illumination light above the rotary panel also
goes off.
1 Press DEMO/ECO twice.
"DIM MODE" is displayed.
2 Within 4 seconds, press ENTER/ILLUMINATION.
The currently selected brightness is displayed.
Example: When "DIM-OFF" is selected
3 Within 4 seconds, turn MULTI JOG to select the
desired brightness.
DIM-OFF DIMMER 1
DIMMER 3 DIMMER 2
4 Within 4 seconds, press ENTER/ILLUMINATION.
SETTING POWER
ECONOMIZING MODE
Setting this unit to power economizing mode reduces power
consumption.
When the power economizing mode is set to ON or AUTO
• When the power shuts off, all indications of the display window
including the clock are turned off.
• When the power turns on by timer recording (page 26), the display
window brightness is set to "DIMMER 3", all button lamps are
off, and the volume is set to the minimum level.
• The display window brightens only when the unit is being
operated. When the unit has not been operated for 10 seconds,
the brigthtness switches to the level chosen by the "DIM MODE"
setting. (If the brightness is set to "DIM-OFF", the brightness
does not change.)
When the power economizing mode is set to AUTO
In addition to the above:
• If the disc is stopped and there is no audio input from any
connected external equipment for 10 minutes, the power shuts
off. (When listening to the radio, however, the power does not
shut off automatically.)
1 Press DEMO/ECO.
"ECO MODE" is displayed.
2 Within 4 seconds, press ENTER/ILLUMINATION.
The current power economizing mode status is displayed.
If the power economizing mode is OFF : ECO OFF
If the power economizing mode is ON : ECO ON
If the power economizing mode is AUTO : ECO AUTO
3 Within 4 seconds, turn MULTI JOG to select the
desired power eoconomizing mode.
Example: when "AUTO" is selected
4 Within 4 seconds, press ENTER/ILLUMINATION.
Standby power consumption
When the power economizing mode is OFF : 20 W
When the power economizing mode is ON or AUTO : 1.5 W