Advantech PCE-5120 - Manual (Page 95)

79 Chapter 9
Read FRU Inventory Data Storage 0x11 M
Write FRU Inventory Data Storage 0x12 M
Sensor Device
Commands NetFn Cmd Mandatory /
Optional
Set Sensor Hysteresis S/E 0x24 O
Get Sensor Hysteresis S/E 0x25 O
Set Sensor Threshold S/E 0x26 O
Get Sensor Threshold S/E 0x27 O
Set Sensor Event Enable S/E 0x28 O
Get Sensor Event Enable S/E 0x29 O
Re-arm Sensor Events S/E 0x2a O
Get Sensor Event Status S/E 0x2b O
Get Sensor Reading S/E 0x2d M
LAN Device Commands NetFn Cmd Mandatory /
Optional
Set LAN Configuration Parame-
ters Transport 0x01 M
Get LAN Configuration Param-
eters Transport 0x02 M
Serial/Modem Device
Commands NetFn Cmd Mandatory /
Optional
Set Serial/Modem Configura-
tion Parameters Transport 0x10 M
Get Serial/Modem Configura-
tion Parameters Transport 0x11 M
Set Serial/Modem Mux Transport 0x12 M
Note: Network function (NetFn) is a field that identifies
the functional class of the message. The Net-
work Function clusters IPMI commands into dif-
ferent sets. You can refer the IPMI spec of
network function codes for more information.
Note: These command codes follow the IPMI spec.
Note: Mandatory and Optional command are define in
IPMI spec. If you want to know more detail,
please refer to IPMI spec.