Advantech PCE-5120 - Manual (Page 44)

PCE-5120 User Manual 28
2.16 BMC connector (BMC1)
PCE-5120 is designed for supporting IPMI 2.0. The BMC module is
mounted on board through this connector. For more detail operating
information, please refer to Chapter 9.
2.17 USB (USB12, USB34)
The PCE-5120 provides four on board USB 2.0 ports which support
transmission rate up to 480 Mbps and is fuse-protected. To install the
USB cable (p/n: 1700002314) bracket, find an empty slot in your chassis
and unscrew the plate that covers the end of the slot. Screw in the bracket
in place of the plate. Next, attach the USB connector to USB12 and
USB34 on the CPU card.
JFP3
JFP2
JFP1
LPT1
BMC1
JFP3
JFP2
JFP1
LPT1
USB12 USB34