AMX Mio Modero R-4 - Manual (Page 83)

Programming the Mio R-4
75 Mio Modero R-4
Remote Run Time Commands (Cont.)
BEEP
Output a beep
Output a beep.
Syntax:
SEND_COMMAND ,"'BEEP'"
Example:
SEND_COMMAND Device,"'BEEP'"
Outputs a beep.
BRIT
Set the remote
brightness.
Syntax:
"'BRIT-'"
Variables:
• brightness level = 0 - 100.
Example:
SEND COMMAND Device,"'BRIT-50'"
Sets the brightness level to 50.
DBEEP
Output a double
beep
Output a double beep.
Syntax:
SEND_COMMAND ,"'DBEEP'"
Example:
SEND_COMMAND Device,"'DBEEP'"
Outputs a double beep.
@EKP
Extend the

keypad
Extend the keypad. Pops up the keypad icon and initializes the text string to that specified.
The Prompt Text is optional.
Syntax:
SEND_COMMAND ,"'@EKP-;'"
Variables:
• initial text = 1 - 50 ASCII characters.
• prompt text = 1 - 50 ASCII characters.
Example:
SEND_COMMAND Device,"'@EKP-33333333;Enter Password'"
Pops up the Keypad and initializes the text string '33333333' with prompt text 'Enter Pass-
word'.
PKEYP
Present a private
keypad
Present a private keypad. Pops up the keypad icon and initializes the text string to that
specified. Keypad displays a '*' instead of the numbers typed. The Prompt Text is optional.
Syntax:
SEND_COMMAND ,"'PKEYP-'"
Variables:
• initial text = 1 - 50 ASCII characters.
Example:
SEND_COMMAND Device,"'PKEYP-123456789'"
Pops up the Keypad and initializes the text string '123456789' in '*'.