picture>'"
Variable:
• variable text address range = 1 - 4000.
• button states range = 1 - 256 for multi-state buttons (0 = All states, for General buttons
1 = Off state and 2 = On state).
• name of bitmap/picture = 1 - 50 ASCII characters.
Example:
SEND_COMMAND Device,"'^BMP-500.504&510.515,1,bitmap.png'"
Sets the OFF state picture for the buttons with variable text ranges of 500-504 & 510-515.
^BOR
Set a border to a
specific border
style associated
with a border
value for those
buttons with a
defined address
range
Set a border to a specific border style associated with a border value for those buttons
with a defined address range.
Syntax:
"'^BOR-,'"
Variable:
• variable text address range = 1 - 4000.
• border style name = Refer to theBorder Styles by Numbers table on page 38.
• border value = 0 - 41.
Examples:
SEND_COMMAND Device,"'^BOR-500.504&510.515,10'"
Sets the border by number (#10) to those buttons with the variable text range of 500-504
& 510-515.
SEND_COMMAND Device,"'^BOR-500.504&510,AMX Elite -M'"
Sets the border by name (AMX Elite) to those buttons with the variable text range of
500-504 & 510-515.
The border style is available through the TPDesign4 border-style drop-down list. Refer to
theTPD4 Border Styles by Name table on page 38 for more information.
^BPP
Set or clear the
protected page flip
flag of a
button
Set or clear the protected page flip flag of a button. Zero clears the flag.
Syntax:
"'^BPP-,'"
Variable:
• variable text address range = 1 - 4000.
• protected page flip flag value range = 0 - 4 (0 clears the flag).
Example:
SEND_COMMAND Device,"'^BPP-500,1'"
Sets the button to protected page flip flag 1 (sets it to password 1).
