AMX Mio Modero R-4 - Manual (Page 61)

Programming the Mio R-4
53 Mio Modero R-4
"^" Button Commands (Cont.)
^BMC
Copy attributes of
the source button
to all the

destination

buttons.
Copy attributes of the source button to all the destination buttons.
Note that the source is a single button state. Each state must be copied as a separate
command. The section represents what attributes will be copied. All codes are

2 char pairs that can be separated by comma, space, percent or just ran together.
Syntax:
"'^BMC-,,port>,,,'"Variable: • variable text address range = 1 - 4000.• button states range = 1 - 256 for multi-state buttons (0 = All states, for General buttons1 = Off state and 2 = On state).• source port = 1 - 100.• source address = 1 - 4000.• source state = 1 - 256.codes: BM - Picture/Bitmap
BR - Border
CB - Border Color
CF - Fill Color
CT - Text Color
EC - Text effect color
EF - Text effect
FT - Font
IC - Icon
JB - Bitmap alignment
JI - Icon alignment
JT - Text alignment
LN - Lines of video removed
OP - Opacity
TX - Text
WW - Word wrap on/offExample:SEND_COMMAND Device,"'^BMC-425,1,1,500,1,BR'"orSEND_COMMAND Device,"'^BMC-425,1,1,500,1,%BR'"Copies the OFF state border of button with a variable text address of 500 onto the OFF
state border of button with a variable text address of 425.Example 2:SEND_COMMAND Device,"'^BMC-150,1,1,315,1,%BR%FT%TX%BM%IC%CF%CT'"Copies the OFF state border, font, Text, bitmap, icon, fill color and text color of the button
with a variable text address of 315 onto the OFF state border, font, Text, bitmap, icon, fill
color and text color of the button with a variable text address of 150.
port>,,,'"
Variable:
• variable text address range = 1 - 4000.
• button states range = 1 - 256 for multi-state buttons (0 = All states, for General buttons

1 = Off state and 2 = On state).
• source port = 1 - 100.
• source address = 1 - 4000.
• source state = 1 - 256.
codes:
BM - Picture/Bitmap
BR - Border
CB - Border Color
CF - Fill Color
CT - Text Color
EC - Text effect color
EF - Text effect
FT - Font
IC - Icon
JB - Bitmap alignment
JI - Icon alignment
JT - Text alignment
LN - Lines of video removed
OP - Opacity
TX - Text
WW - Word wrap on/off
Example:
SEND_COMMAND Device,"'^BMC-425,1,1,500,1,BR'"
or
SEND_COMMAND Device,"'^BMC-425,1,1,500,1,%BR'"
Copies the OFF state border of button with a variable text address of 500 onto the OFF
state border of button with a variable text address of 425.
Example 2:
SEND_COMMAND Device,"'^BMC-150,1,1,315,1,%BR%FT%TX%BM%IC%CF%CT'"
Copies the OFF state border, font, Text, bitmap, icon, fill color and text color of the button
with a variable text address of 315 onto the OFF state border, font, Text, bitmap, icon, fill
color and text color of the button with a variable text address of 150.