CEMB USA C206 (A) User Manual

Page 4

I 0638

2 - HANDLING, LIFTING

N.B.: NEVER USE OTHER POINTS TO LIFT THE MACHINE.

3 - START- UP

3.1 - ANCHORING

The machine can operate on any fl at non resilient fl oor without having to be anchored to the fl oor. Make sure that the
machine rests on the 3 mounting points provided (fi g. 2).

3.2 - ELECTRICAL CONNECTION

The machine is supplied with an AC power supply and power cable with 12-24 VDC battery.
The supply voltage is given on the machine nameplate. It cannot be changed.
Connection to mains should always be made by expert personnel.

3.3 - ADAPTER MOUNTING

The wheel balancer is supplied complete with cone type adapter for fastening wheels with central bore.
Other optional adapters can be mounted:
a) Remove threaded end piece A after backing off screw B.
b) Mount the new adapter (see enclosed brochures) .

NOTE : CAREFULLY CLEAN THE COUPLING SURFACES

BEFORE PERFORMING ANY OPERATION.

3.4 - WHEEL MOUNTING

The wheels should be fastened with one of the numerous adapters available (see enclosed brochures).

N.B.: Incorrect centering inevitably causes unbalance.