MoTeC PWC Plug-In ECU - Manual (Page 41)

34 Data Logging MoTeC
5. On the Adjust menu, click Data Logging Setup.
6. Click Engine Sensors and select the sensor you would like to
change.
7. To include the sensor in the logging, enter a value for the Samples
per Second at which you would like to log this sensor
- OR-
To exclude the sensor from the logging, enter 0 for the Samples per
Second.
As you are changing the settings a new logging time will be
calculated. This is shown in the bar under the logging parameters.
8. Press N to browse through all the pages with the other available
logging settings until finished.
A maximum of 64 items can be selected for logging.
9. On the File menu, click Save.
10. On the File menu, click Send File to ECU.
Tips:
•
While changing the logging settings, actual logging will be disabled until
you disconnect the ECU from the PC. To guarantee that logging will
resume MoTeC suggests that after you have finalised your logging
settings in ECU Manager you select another table, for example a fuel or
spark map. For a quick way to do this, press F5 to display the fuel map.
•
Ensure that a maximum of 64 channels are selected for logging.
If more channels are selected, only the first 64 selected channels are
logged.