MoTeC PWC Plug-In ECU - Manual (Page 40)

MoTeC Data Logging 33
To select the log file - using i2
Ensure you have i2 data analysis software installed.
1. Open i2 Data analysis software and open a Circuit project.
2. Double click on the file you would like to view.
All details you entered when downloading the logged data will be
listed in the middle window.
Tip: To get started with using i2 to analyse your own logged data,
there are extensive help files included in the software. You can also
download seminar notes on the use of i2 from the MoTeC website.
See How to Get More Information.
To send a log file by email
1. On the File menu, click Open Log File.
2. Right click on the file you would like to send.
Note: This file must be open, indicated with a green tick on the file
icon.
3. Click Copy, open your email recipient (e.g. MS Outlook) and paste the
file into the email
- OR -
Click Send To and then click Mail Recipient.
Change the Logging Settings
The provided logging configuration in the Base Map will provide 5 to 15
minutes of logging. If you would like to increase this time, you need to reduce
the number of channels logged, or reduce the logging rate for the logged
channels.
To change the logging configuration
See the relevant Power Control Strategy section to ensure the M400
Marine ECU stays powered while downloading the data.
1. Connect the ECU to the PC. See Connecting the ECU to a PC.
2. Open ECU Manager software.
3. On the File menu, click Save As and choose a new file name.
This will save the changes you are going to make in a new file and
prevent accidentally overwriting the standard Base Map.
Tip: It is good practice to add an incrementing number to the file
name to keep track of the files you are creating.
4. On the File menu, click Edit Comments.
Tip: Filling in comments will help to identify the file when you refer to
it in the future.