MoTeC PWC Plug-In ECU - Manual (Page 23)

16 Sea-Doo 2004 – 2009 Installation
Configuration File
The Sea-Doo PWC Plug-in ECU is compatible with all RXP, RXPX, RXT, and
RXTX models from 2004 to 2009. However there are numerous harness
differences between 2004-2005, 2006, and 2007-2009 mode
requires different M400 configuration files (Base Maps). If the incorrect
configuration file is loaded, the PWC may operate incorrectly or have limited
dashboard functions.
The three configuration file versions are designated 2004, 2006
• 2004 Configuration files match original ECU part numbers:
420664942, 420664947.
• 2006 Configuration files match original ECU part numbers
420664946
• 2007 Configuration files match original ECU part numbers
420665789, 420665861
To mimic all original Sea-Doo functions including dashboard alerts, the Sea
Doo PWC Plug-In ECU requires M400 firmware version 3.52P or higher.
MoTeC
in ECU is compatible with all RXP, RXPX, RXT, and
RXTX models from 2004 to 2009. However there are numerous harness
2009 models. Each of these
different M400 configuration files (Base Maps). If the incorrect
configuration file is loaded, the PWC may operate incorrectly or have limited
The three configuration file versions are designated 2004, 2006 and 2007.
2004 Configuration files match original ECU part numbers:
ginal ECU part numbers:
rt numbers: 420665785,
Doo functions including dashboard alerts, the Sea-
In ECU requires M400 firmware version 3.52P or higher.