MoTeC M880 - Manual (Page 72)

70 ECU Manager Software
Copy Vertical Column Right
Copies the data in the current Column to the Column immediately to its right.
Copy Horizontal Row Up
Copies the data in the current row to the row above.
Copy Site Up And Right
Copies the value of the current site to the sites immediately above, right and
diagonally above and right if the sites do not contain an *.
Reverse Y-Axis
Reverses the Y axis for the Graph or Table or both. This makes some graphs
easier to see.
Toggle Table Mode
If a table is displayed and there is no graph displayed this will switch the table
between table mode and graph mode.
Set All Values To Current
Set all values in the current table to the value of the current site.
Reset ECU
Resets the ECU. This can be useful if changes have been made to a setup
item that requires the ECU to be reset, normally this does not happen until a
different screen is selected.
Clear All *
Clears all *'s in either the currently displayed table or all tables.
The *’s are normally used to indicate which sites have been tuned.
Clear Current *
Clears the * on the current site.
Set with *
Sets an * on the current site whether or not the engine is currently at that site.